Vinyl stickers are one of the most popular choices for applying cool graphics on your car windows. These stickers are mostly used for decals, bumper stickers, and car logos.
What are the things that you need to keep in mind when you are going to apply vinyl stickers on your windows? The following blog will discuss the step-by-step methods of immaculately applying a vinyl sticker to a car window to add an individualistic touch of your own.
How to Apply Vinyl Stickers to Your Car's Window
Here we will explain the three steps required to apply vinyl stickers to car windows successfully, and they are:
Step 1: Check The Weather To See If It’s Appropriate or Not.
Before you can move on to the vinyl stickers, carefully observe the temperature of the weather, especially outdoors (Not ideal if there are raindrops or strong breezes).
So, the perfect moment will be to attach the sticker in broad daylight as it will be visible for the naked eye to spot dust in the glass.
Step 2: Clean The Window Spotless.
The glass window must be spotless before we can stick a vinyl sticker onto them.
Therefore, washing the glasses beforehand with soap plus water or washable alcohol is highly recommended.
Also, after cleaning it with your preferable option, finish it by gently splashing water until the soap or the alcohol solution is completely gone.
Lastly, let a slight bit of water dry off.
Note: Don’t forcefully use a towel or tissue. It can leave out some components.
Step 3: Masking Tape Utilization
In this final step, you will finish the ordeal by attaching the sticker to the window glass.
To achieve that, masking tape is essential to ensure that your stickers are placed precisely in the spot you’d like them.
You will need to leave your white paper backing position in the direction of the surface to which you’re applying the sticker; put the sticker exactly where you want to.
Carefully integrate a masking tape right at the top of the sticker. This will solidify the position to the exact spot.
Then slowly raise the sticker, similar to hanging from a hinge, and release its backing. Hold on to the bottom edge, then slowly lower the sticker using your thumb’s other hand to press the middle out, gradually going from the top to the bottom.
And you are done!
Final Verdict
So, to answer the ultimate question, “how to apply vinyl stickers to car window? ” there is a straightforward solution to this problem provided by the above-manifested steps. All you have to do is follow these three steps in-depth: check the room or outside temperature, clean the glass window, and use the masking tape efficiently, and you will have your sticker applied in no time.
